# Tagged with #walkers 8 documentation articles | 0 announcements | 8 forum discussions

Created 2012-11-05 16:20:38 | Updated 2013-01-14 17:35:25 | Tags: official basic analyst intro parallelism performance walkers map-reduce

### Overview

One of the key challenges of working with next-gen sequence data is that input files are usually very large. We can’t just make the program open the files, load all the data into memory and perform whatever analysis is needed on all of it in one go. It’s just too much work, even for supercomputers.

Instead, we make the program cut the job into smaller tasks that the computer can easily process separately. Then we have it combine the results of each step into the final result.

### Map/Reduce

Map/Reduce is the technique we use to achieve this. It consists of three steps formally called filter, map and reduce. Let’s apply it to an example case where we want to find out what is the average depth of coverage in our dataset for a certain region of the genome.

• filter determines what subset of the data needs to be processed in each task. In our example, the program lists all the reference positions in our region of interest.

• map applies the function, i.e. performs the analysis on each subset of data. In our example, for each position in the list, the program looks into the BAM file, pulls out the pileup of bases and outputs the depth of coverage at that position.

• reduce combines the elements in the list of results output by the map function. In our example, the program takes the coverage numbers that were calculated separately for all the reference positions and calculates their average, which is the final result we want.

This may seem trivial for such a simple example, but it is a very powerful method with many advantages. Among other things, it makes it relatively easy to parallelize operations, which makes the tools run much faster on large datasets.

### Walkers, filters and traversal types

All the tools in the GATK are built from the ground up to take advantage of this method. That’s why we call them walkers: because they “walk” across the genome, getting things done.

Note that even though it’s not included in the Map/Reduce technique’s name, the filter step is very important. It determines what data get presented to the tool for analysis, selecting only the appropriate data for each task and discarding anything that’s not relevant. This is a key part of the Map/Reduce technique, because that’s what makes each task “bite-sized” enough for the computer to handle easily.

Each tool has filters that are tailored specifically for the type of analysis it performs. The filters rely on traversal engines, which are little programs that are designed to “traverse” the data (i.e. walk through the data) in specific ways.

There are three major types of traversal: Locus Traversal, Read Traversal and Active Region Traversal. In our interval coverage example, the tool’s filter uses the Locus Traversal engine, which walks through the data by locus, i.e. by position along the reference genome. Because of that, the tool is classified as a Locus Walker. Similarly, the Read Traversal engine is used, you’ve guessed it, by Read Walkers.

The GATK engine comes packed with many other ways to walk through the genome and get the job done seamlessly, but those are the ones you’ll encounter most often.

Created 2012-08-15 22:36:36 | Updated 2012-10-18 15:17:47 | Tags: official basic developer scala walkers

## 1. Install scala somewhere

At the Broad, we typically put it somewhere like this:

/home/radon01/depristo/work/local/scala-2.7.5.final


Next, create a symlink from this directory to trunk/scala/installation:

ln -s /home/radon01/depristo/work/local/scala-2.7.5.final trunk/scala/installation


## 2. Setting up your path

Right now the only way to get scala walkers into the GATK is by explicitly setting your CLASSPATH in your .my.cshrc file:

setenv CLASSPATH /humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/FourBaseRecaller.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/GenomeAnalysisTK.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/Playground.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/StingUtils.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/bcel-5.2.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/colt-1.2.0.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/google-collections-0.9.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/javassist-3.7.ga.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/junit-4.4.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/log4j-1.2.15.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/picard-1.02.63.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/picard-private-875.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/reflections-0.9.2.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/sam-1.01.63.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/simple-xml-2.0.4.jar:/humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/GATKScala.jar:/humgen/gsa-scr1/depristo/local/scala-2.7.5.final/lib/scala-library.jar


Really this needs to be manually updated whenever any of the libraries are updated. If you see this error:

Caused by: java.lang.RuntimeException: java.util.zip.ZipException: error in opening zip file
at org.reflections.util.VirtualFile.iterable(VirtualFile.java:79)
at org.reflections.util.VirtualFile$5.transform(VirtualFile.java:169) at org.reflections.util.VirtualFile$5.transform(VirtualFile.java:167)
at org.reflections.util.FluentIterable$3.transform(FluentIterable.java:43) at org.reflections.util.FluentIterable$3.transform(FluentIterable.java:41)
at org.reflections.util.FluentIterable$ForkIterator.computeNext(FluentIterable.java:81) at com.google.common.collect.AbstractIterator.tryToComputeNext(AbstractIterator.java:132) at com.google.common.collect.AbstractIterator.hasNext(AbstractIterator.java:127) at org.reflections.util.FluentIterable$FilterIterator.computeNext(FluentIterable.java:102)
at org.reflections.util.FluentIterable$TransformIterator.computeNext(FluentIterable.java:124) at com.google.common.collect.AbstractIterator.tryToComputeNext(AbstractIterator.java:132) at com.google.common.collect.AbstractIterator.hasNext(AbstractIterator.java:127) at org.reflections.Reflections.scan(Reflections.java:69) at org.reflections.Reflections.<init>(Reflections.java:47) at org.broadinstitute.sting.utils.PackageUtils.<clinit>(PackageUtils.java:23)  It's because the libraries aren't updated. Basically just do an ls of your trunk/dist directory after the GATK has been build, make this your classpath as above, and tack on: /humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/GATKScala.jar:/humgen/gsa-scr1/depristo/local/scala-2.7.5.final/lib/scala-library.jar  A command that almost works (but you'll need to replace the spaces with colons) is: #setenv CLASSPATH$CLASSPATH ls /humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/*.jar /humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/GATKScala.jar:/humgen/gsa-scr1/depristo/local/scala-2.7.5.final/lib/scala-library.jar


## 3. Building scala code

All of the Scala source code lives in scala/src, which you build using ant scala

There are already some example Scala walkers in scala/src, so doing a standard checkout, installing scala, settting up your environment, should allow you to run something like:

gsa2 ~/dev/GenomeAnalysisTK/trunk > ant scala
Buildfile: build.xml

init.scala:

scala:
[echo] Sting: Compiling scala!
[scalac] Compiling 2 source files to /humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/scala/classes
[scalac] warning: there were deprecation warnings; re-run with -deprecation for details
[scalac] one warning found
[scalac] Compile suceeded with 1 warning; see the compiler output for details.
[delete] Deleting: /humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/GATKScala.jar
[jar] Building jar: /humgen/gsa-scr1/depristo/dev/GenomeAnalysisTK/trunk/dist/GATKScala.jar


## 4. Invoking a scala walker

Until we can include Scala walkers along with the main GATK jar (avoiding the classpath issue too) you have to invoke your scala walkers using this syntax:

java -Xmx2048m org.broadinstitute.sting.gatk.CommandLineGATK -T BaseTransitionTableCalculator -R /broad/1KG/reference/human_b36_both.fasta -I /broad/1KG/DCC_merged/freeze5/NA12878.pilot2.SLX.bam -l INFO -L 1:1-100


Here, the BaseTransitionTableCalculator walker is written in Scala and being loaded into the system by the GATK walker manager. Otherwise everything looks like a normal GATK module.

Created 2012-08-15 18:37:57 | Updated 2012-10-18 15:20:32 | Tags: official basic developer walkers

The primary goal of the GATK is to provide a suite of small data access patterns that can easily be parallelized and otherwise externally managed. As such, rather than asking walker authors how to iterate over a data stream, the GATK asks the user how data should be presented.

## Locus walkers

Walk over the data set one location (single-base locus) at a time, presenting all overlapping reads, reference bases, and reference-ordered data.

### 1. Switching between covered and uncovered loci

The @By attribute can be used to control whether locus walkers see all loci or just covered loci. To switch between viewing all loci and covered loci, apply one of the following attributes:

@By(DataSource.REFERENCE)


### 2. Filtering defaults

By default, the following filters are automatically added to every locus walker.

• Non-primary alignments.
• Reads failing vendor quality checks.

## ROD walkers

These walkers walk over the data set one location at a time, but only those locations covered by reference-ordered data. They are essentially a special case of locus walkers. ROD walkers are read-free traversals that include operate over Reference Ordered Data and the reference genome at sites where there is ROD information. They are geared for high-performance traversal of many RODs and the reference such as VariantEval and CallSetConcordance. Programmatically they are nearly identical to RefWalkers<M,T> traversals with the following few quirks.

### 1. Differences from a RefWalker

• RODWalkers are only called at sites where there is at least one non-interval ROD bound. For example, if you are exploring dbSNP and some GELI call set, the map function of a RODWalker will be invoked at all sites where there is a dbSNP record or a GELI record.

• Because of this skipping RODWalkers receive a context object where the number of reference skipped bases between map calls is provided:

nSites += context.getSkippedBases() + 1; // the skipped bases plus the current location

In order to get the final count of skipped bases at the end of an interval (or chromosome) the map function is called one last time with null ReferenceContext and RefMetaDataTracker objects. The alignment context can be accessed to get the bases skipped between the last (and final) ROD and the end of the current interval.

### 2. Filtering defaults

ROD walkers inherit the same filters as locus walkers:

• Non-primary alignments.
• Reads failing vendor quality checks.

### 3. Example change over of VariantEval

Changing to a RODWalker is very easy -- here's the new top of VariantEval, changing the system to a RodWalker from its old RefWalker state:

//public class VariantEvalWalker extends RefWalker<Integer, Integer> {
public class VariantEvalWalker extends RodWalker<Integer, Integer> {


The map function must now capture the number of skipped bases and protect itself from the final interval map calls:

public Integer map(RefMetaDataTracker tracker, ReferenceContext ref, AlignmentContext context) {
nMappedSites += context.getSkippedBases();

if ( ref == null ) { // we are seeing the last site
return 0;
}

nMappedSites++;


That's all there is to it!

### 4. Performance improvements

A ROD walker can be very efficient compared to a RefWalker in the situation where you have sparse RODs. Here is a comparison of ROD vs. Ref walker implementation of VariantEval:

RODWalker RefWalker
dbSNP and 1KG Pilot 2 SNP calls on chr1 164u (s) 768u (s)
Just 1KG Pilot 2 SNP calls on chr1 54u (s) 666u (s)

Read walkers walk over the data set one read at a time, presenting all overlapping reference bases and reference-ordered data.

### Filtering defaults

By default, the following filters are automatically added to every read walker.

Read pair walkers walk over a queryname-sorted BAM, presenting each mate and its pair. No reference bases or reference-ordered data are presented.

### Filtering defaults

By default, the following filters are automatically added to every read pair walker.

## Duplicate walkers

Duplicate walkers walk over a read and all its marked duplicates. No reference bases or reference-ordered data are presented.

### Filtering defaults

By default, the following filters are automatically added to every duplicate walker.

• Non-primary alignments

Created 2012-08-15 17:15:34 | Updated 2012-10-18 15:24:35 | Tags: official developer walkers advanced

## 1. Introduction

The LocusTraversal now supports passing walkers reads that have deletions spanning the current locus. This is useful in many situation where you want to calculate coverage, call variants and need to avoid calling variants where there are a lot of deletions, etc.

Currently, the system by default will not pass you deletion-spanning reads. In order to see them, you need to overload the function:

/**
* (conceptual static) method that states whether you want to see reads piling up at a locus
* that contain a deletion at the locus.
*
* ref:   ATCTGA
*
* Normally, the locus iterator only returns a list of read1 at this locus at position 3, but
* if this function returns true, then the system will return (read1, read2) with offsets
* of (3, -1).  The -1 offset indicates a deletion in the read.
*
* @return false if you don't want to see deletions, or true if you do
*/
public boolean includeReadsWithDeletionAtLoci() { return true; }


in your walker. Now you will start seeing deletion-spanning reads in your walker. These reads are flagged with offsets of -1, so that you can:

    for ( int i = 0; i < context.getReads().size(); i++ ) {
int offset = context.getOffsets().get(i);

if ( offset == -1 )
else
}


There are also two convenience functions in AlignmentContext to extract subsets of the reads with and without spanning deletions:

/**
* Returns only the reads in ac that do not contain spanning deletions of this locus
*
* @param ac
* @return
*/
public static AlignmentContext withoutSpanningDeletions( AlignmentContext ac );

/**
* Returns only the reads in ac that do contain spanning deletions of this locus
*
* @param ac
* @return
*/
public static AlignmentContext withSpanningDeletions( AlignmentContext ac );


Created 2012-08-15 17:00:11 | Updated 2013-03-25 18:25:50 | Tags: official gatkdocs developer walkers intermediate

## 1. Adding walker and package descriptions to the help text

The GATK's build system uses the javadoc parser to extract the javadoc for classes and packages and embed the contents of that javadoc in the help system. If you add Javadoc to your package or walker, it will automatically appear in the help. The javadoc parser will pick up on 'standard' javadoc comments, such as the following, taken from PrintReadsWalker:

/**
* This walker prints out the input reads in SAM format.  Alternatively, the walker can write reads into a specified BAM file.
*/


You can add javadoc to your package by creating a special file, package-info.java, in the package directory. This file should consist of the javadoc for your package plus a package descriptor line. One such example follows:

/**
* @help.display.name Miscellaneous walkers (experimental)
*/


Additionally, the GATK provides two extra custom tags for overriding the information that ultimately makes it into the help.

• @help.display.name Changes the name of the package as it appears in help. Note that the name of the walker cannot be changed as it is required to be passed verbatim to the -T argument.

• @help.summary Changes the description which appears on the right-hand column of the help text. This is useful if you'd like to provide a more concise description of the walker that should appear in the help.

• @help.description Changes the description which appears at the bottom of the help text with -T <your walker> --help is specified. This is useful if you'd like to present a more complete description of your walker.

## 2. Hiding experimental walkers (use sparingly, please!)

Walkers can be hidden from the documentation system by adding the @Hidden annotation to the top of each walker. @Hidden walkers can still be run from the command-line, but their documentation will not be visible to end users. Please use this functionality sparingly to avoid walkers with hidden command-line options that are required for production use.

## 3. Disabling building of help

Because the building of our help text is actually heavyweight and can dramatically increase compile time on some systems, we have a mechanism to disable help generation.

Compile with the following command:

ant -Ddisable.help=true


to disable generation of help.

Created 2012-08-14 18:16:53 | Updated 2012-10-18 15:28:56 | Tags: test official developer walkers advanced

## 1. Testing core walkers is critical

Most GATK walkers are really too complex to easily test using the standard unit test framework. It's just not feasible to make artificial read piles and then extrapolate from simple tests passing whether the system as a whole is working correctly. However, we need some way to determine whether changes to the core of the GATK are altering the expected output of complex walkers like BaseRecalibrator or SingleSampleGenotyper. In additional to correctness, we want to make sure that the performance of key walkers isn't degrading over time, so that calling snps, cleaning indels, etc., isn't slowly creeping down over time. Since we are now using a bamboo server to automatically build and run unit tests (as well as measure their runtimes) we want to put as many good walker tests into the test framework so we capture performance metrics over time.

## 2. The WalkerTest framework

To make this testing process easier, we've created a WalkerTest framework that lets you invoke the GATK using command-line GATK commands in the JUnit system and test for changes in your output files by comparing the current ant build results to previous run via an MD5 sum. It's a bit coarse grain, but it will work to ensure that changes to key walkers are detected quickly by the system, and authors can either update the expected MD5s or go track down bugs.

The system is fairly straightforward to use. Ultimately we will end up with JUnit style tests in the unit testing structure. In the piece of code below, we have a piece of code that checks the MD5 of the SingleSampleGenotyper's GELI text output at LOD 3 and LOD 10.

package org.broadinstitute.sting.gatk.walkers.genotyper;

import org.junit.Test;

import java.util.HashMap;
import java.util.Map;
import java.util.Arrays;

public class SingleSampleGenotyperTest extends WalkerTest {
@Test
public void testLOD() {
HashMap<Double, String> e = new HashMap<Double, String>();
e.put( 10.0, "e4c51dca6f1fa999f4399b7412829534" );
e.put( 3.0, "d804c24d49669235e3660e92e664ba1a" );

for ( Map.Entry<Double, String> entry : e.entrySet() ) {
WalkerTest.WalkerTestSpec spec = new WalkerTest.WalkerTestSpec(
"-T SingleSampleGenotyper -R /broad/1KG/reference/human_b36_both.fasta -I /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SLX.bam -varout %s --variant_output_format GELI -L 1:10,000,000-11,000,000 -m EMPIRICAL -lod " + entry.getKey(), 1,
Arrays.asList(entry.getValue()));
executeTest("testLOD", spec);
}
}
}


The fundamental piece here is to inherit from WalkerTest. This gives you access to the executeTest() function that consumes a WalkerTestSpec:

    public WalkerTestSpec(String args, int nOutputFiles, List<String> md5s)


The WalkerTestSpec takes regular, command-line style GATK arguments describing what you want to run, the number of output files the walker will generate, and your expected MD5s for each of these output files. The args string can contain %s String.format specifications, and for each of the nOutputFiles, the executeTest() function will (1) generate a tmp file for output and (2) call String.format on your args to fill in the tmp output files in your arguments string. For example, in the above argument string varout is followed by %s, so our single SingleSampleGenotyper output is the variant output file.

## 3. Example output

When you add a walkerTest inherited unit test to the GATK, and then build test, you'll see output that looks like:

[junit] WARN  13:29:50,068 WalkerTest - --------------------------------------------------------------------------------
[junit] WARN  13:29:50,068 WalkerTest - --------------------------------------------------------------------------------
[junit] WARN  13:29:50,069 WalkerTest - Executing test testLOD with GATK arguments: -T SingleSampleGenotyper -R /broad/1KG/reference/human_b36_both.fasta -I /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SLX.bam -varout /tmp/walktest.tmp_param.05524470250256847817.tmp --variant_output_format GELI -L 1:10,000,000-11,000,000 -m EMPIRICAL -lod 3.0
[junit]
[junit] WARN  13:29:50,069 WalkerTest - Executing test testLOD with GATK arguments: -T SingleSampleGenotyper -R /broad/1KG/reference/human_b36_both.fasta -I /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SLX.bam -varout /tmp/walktest.tmp_param.05524470250256847817.tmp --variant_output_format GELI -L 1:10,000,000-11,000,000 -m EMPIRICAL -lod 3.0
[junit]
[junit] WARN  13:30:39,407 WalkerTest - Checking MD5 for /tmp/walktest.tmp_param.05524470250256847817.tmp [calculated=d804c24d49669235e3660e92e664ba1a, expected=d804c24d49669235e3660e92e664ba1a]
[junit] WARN  13:30:39,407 WalkerTest - Checking MD5 for /tmp/walktest.tmp_param.05524470250256847817.tmp [calculated=d804c24d49669235e3660e92e664ba1a, expected=d804c24d49669235e3660e92e664ba1a]
[junit] WARN  13:30:39,408 WalkerTest -   => testLOD PASSED
[junit] WARN  13:30:39,408 WalkerTest -   => testLOD PASSED
[junit] WARN  13:30:39,409 WalkerTest - --------------------------------------------------------------------------------
[junit] WARN  13:30:39,409 WalkerTest - --------------------------------------------------------------------------------
[junit] WARN  13:30:39,409 WalkerTest - Executing test testLOD with GATK arguments: -T SingleSampleGenotyper -R /broad/1KG/reference/human_b36_both.fasta -I /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SLX.bam -varout /tmp/walktest.tmp_param.03852477489430798188.tmp --variant_output_format GELI -L 1:10,000,000-11,000,000 -m EMPIRICAL -lod 10.0
[junit]
[junit] WARN  13:30:39,409 WalkerTest - Executing test testLOD with GATK arguments: -T SingleSampleGenotyper -R /broad/1KG/reference/human_b36_both.fasta -I /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SLX.bam -varout /tmp/walktest.tmp_param.03852477489430798188.tmp --variant_output_format GELI -L 1:10,000,000-11,000,000 -m EMPIRICAL -lod 10.0
[junit]
[junit] WARN  13:31:30,213 WalkerTest - Checking MD5 for /tmp/walktest.tmp_param.03852477489430798188.tmp [calculated=e4c51dca6f1fa999f4399b7412829534, expected=e4c51dca6f1fa999f4399b7412829534]
[junit] WARN  13:31:30,213 WalkerTest - Checking MD5 for /tmp/walktest.tmp_param.03852477489430798188.tmp [calculated=e4c51dca6f1fa999f4399b7412829534, expected=e4c51dca6f1fa999f4399b7412829534]
[junit] WARN  13:31:30,213 WalkerTest -   => testLOD PASSED
[junit] WARN  13:31:30,213 WalkerTest -   => testLOD PASSED
[junit] WARN  13:31:30,214 SingleSampleGenotyperTest -
[junit] WARN  13:31:30,214 SingleSampleGenotyperTest -


## 4. Recommended location for GATK testing data

We keep all of the permenant GATK testing data in:

/humgen/gsa-scr1/GATK_Data/Validation_Data/


A good set of data to use for walker testing is the CEU daughter data from 1000 Genomes:

gsa2 ~/dev/GenomeAnalysisTK/trunk > ls -ltr /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_1*.bam /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_1*.calls
-rw-rw-r--+ 1 depristo wga  51M 2009-09-03 07:56 /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SLX.bam
-rw-rw-r--+ 1 depristo wga 185K 2009-09-04 13:21 /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SLX.lod5.variants.geli.calls
-rw-rw-r--+ 1 depristo wga 164M 2009-09-04 13:22 /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SLX.lod5.genotypes.geli.calls
-rw-rw-r--+ 1 depristo wga  24M 2009-09-04 15:00 /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SOLID.bam
-rw-rw-r--+ 1 depristo wga  12M 2009-09-04 15:01 /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.454.bam
-rw-r--r--+ 1 depristo wga  91M 2009-09-04 15:02 /humgen/gsa-scr1/GATK_Data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.allTechs.bam


## 5. Test dependencies

The tests depend on a variety of input files, that are generally constrained to three mount points on the internal Broad network:

*/seq/
*/humgen/1kg/
*/humgen/gsa-hpprojects/GATK/Data/Validation_Data/


To run the unit and integration tests you'll have to have access to these files. They may have different mount points on your machine (say, if you're running remotely over the VPN and have mounted the directories on your own machine).

## 6. MD5 database and comparing MD5 results

Every file that generates an MD5 sum as part of the WalkerTest framework will be copied to <MD5>. integrationtest in the integrationtests subdirectory of the GATK trunk. This MD5 database of results enables you to easily examine the results of an integration test as well as compare the results of a test before/after a code change. For example, below is an example test for the UnifiedGenotyper that, due to a code change, where the output VCF differs from the VCF with the expected MD5 value in the test code itself. The test provides provides the path to the two results files as well as a diff command to compare expected to the observed MD5:

[junit] --------------------------------------------------------------------------------
[junit] Executing test testParameter[-genotype] with GATK arguments: -T UnifiedGenotyper -R /broad/1KG/reference/human_b36_both.fasta -I /humgen/gsa-hpprojects/GATK/data/Validation_Data/NA12878.1kg.p2.chr1_10mb_11_mb.SLX.bam -varout /tmp/walktest.tmp_param.05997727998894311741.tmp -L 1:10,000,000-10,010,000 -genotype
[junit] ##### MD5 file is up to date: integrationtests/ab20d4953b13c3fc3060d12c7c6fe29d.integrationtest
[junit] Checking MD5 for /tmp/walktest.tmp_param.05997727998894311741.tmp [calculated=ab20d4953b13c3fc3060d12c7c6fe29d, expected=0ac7ab893a3f550cb1b8c34f28baedf6]
[junit] ##### Test testParameter[-genotype] is going fail #####
[junit] ##### Path to expected   file (MD5=0ac7ab893a3f550cb1b8c34f28baedf6): integrationtests/0ac7ab893a3f550cb1b8c34f28baedf6.integrationtest
[junit] ##### Path to calculated file (MD5=ab20d4953b13c3fc3060d12c7c6fe29d): integrationtests/ab20d4953b13c3fc3060d12c7c6fe29d.integrationtest
[junit] ##### Diff command: diff integrationtests/0ac7ab893a3f550cb1b8c34f28baedf6.integrationtest integrationtests/ab20d4953b13c3fc3060d12c7c6fe29d.integrationtest


Examining the diff we see a few lines that have changed the DP count in the new code

> diff integrationtests/0ac7ab893a3f550cb1b8c34f28baedf6.integrationtest integrationtests/ab20d4953b13c3fc3060d12c7c6fe29d.integrationtest  | head
385,387c385,387
< 1     10000345        .       A       .       106.54  .       AN=2;DP=33;Dels=0.00;MQ=89.17;MQ0=0;SB=-10.00   GT:DP:GL:GQ     0/0:25:-0.09,-7.57,-75.74:74.78
< 1     10000346        .       A       .       103.75  .       AN=2;DP=31;Dels=0.00;MQ=88.85;MQ0=0;SB=-10.00   GT:DP:GL:GQ     0/0:24:-0.07,-7.27,-76.00:71.99
< 1     10000347        .       A       .       109.79  .       AN=2;DP=31;Dels=0.00;MQ=88.85;MQ0=0;SB=-10.00   GT:DP:GL:GQ     0/0:26:-0.05,-7.85,-84.74:78.04
---
> 1     10000345        .       A       .       106.54  .       AN=2;DP=32;Dels=0.00;MQ=89.50;MQ0=0;SB=-10.00   GT:DP:GL:GQ     0/0:25:-0.09,-7.57,-75.74:74.78
> 1     10000346        .       A       .       103.75  .       AN=2;DP=30;Dels=0.00;MQ=89.18;MQ0=0;SB=-10.00   GT:DP:GL:GQ     0/0:24:-0.07,-7.27,-76.00:71.99
> 1     10000347        .       A       .       109.79  .       AN=2;DP=30;Dels=0.00;MQ=89.18;MQ0=0;SB=-10.00   GT:DP:GL:GQ     0/0:26:-0.05,-7.85,-84.74:78


Whether this is the expected change is up to you to decide, but the system makes it as easy as possible to see the consequences of your code change.

## 7. Testing for Exceptions

The walker test framework supports an additional syntax for ensuring that a particular java Exception is thrown when a walker executes using a simple alternate version of the WalkerSpec object. Rather than specifying the MD5 of the result, you can provide a single subclass of Exception.class and the testing framework will ensure that when the walker runs an instance (class or subclass) of your expected exception is thrown. The system also flags if no exception is thrown.

For example, the following code tests that the GATK can detect and error out when incompatible VCF and FASTA files are given:

@Test public void fail8() { executeTest("hg18lex-v-b36", test(lexHG18, callsB36)); }

private WalkerTest.WalkerTestSpec test(String ref, String vcf) {
return new WalkerTest.WalkerTestSpec("-T VariantsToTable -M 10 -B:two,vcf "
+ vcf + " -F POS,CHROM -R "
+ ref +  " -o %s",
1, UserException.IncompatibleSequenceDictionaries.class);

}


During the integration test this looks like:

[junit] Executing test hg18lex-v-b36 with GATK arguments: -T VariantsToTable -M 10 -B:two,vcf /humgen/gsa-hpprojects/GATK/data/Validation_Data/lowpass.N3.chr1.raw.vcf -F POS,CHROM -R /humgen/gsa-hpprojects/GATK/data/Validation_Data/lexFasta/lex.hg18.fasta -o /tmp/walktest.tmp_param.05541601616101756852.tmp -l WARN -et NO_ET
[junit]    [junit] Wanted exception class org.broadinstitute.sting.utils.exceptions.UserException$IncompatibleSequenceDictionaries, saw class org.broadinstitute.sting.utils.exceptions.UserException$IncompatibleSequenceDictionaries
[junit]   => hg18lex-v-b36 PASSED


## 8. Miscellaneous information

• Please do not put any extremely long tests in the regular ant build test target. We are currently splitting the system into fast and slow tests so that unit tests can be run in \< 3 minutes while saving a test target for long-running regression tests. More information on that will be posted.

• An expected MG5 string of "" means don't check for equality between the calculated and expected MD5s. Useful if you are just writing a new test and don't know the true output.

• Overload parameterize() { return true; } if you want the system to just run your calculations, not throw an error if your MD5s don't match, across all tests

• If your tests all of a sudden stop giving equality MD5s, you can just (1) look at the .tmp output files directly or (2) grab the printed GATK command-line options and explore what is happening.

• You can always run a GATK walker on the command line and then run md5sum on its output files to obtain, outside of the testing framework, the MD5 expected results.

• Don't worry about the duplication of lines in the output ; it's just an annoyance of having two global loggers. Eventually we'll bug fix this away.

Created 2012-08-11 05:31:52 | Updated 2012-10-18 15:35:49 | Tags: official gatkdocs developer walkers intermediate

The GATKDocs are what we call "Technical Documentation" in the Guide section of this website. The HTML pages are generated automatically at build time from specific blocks of documentation in the source code.

The best place to look for example documentation for a GATK walker is GATKDocsExample walker in org.broadinstitute.sting.gatk.examples. This is available here.

Below is the reproduction of that file from August 11, 2011:

/**
* [Short one sentence description of this walker]
*
* <p>
* [Functionality of this walker]
* </p>
*
* <h2>Input</h2>
* <p>
* [Input description]
* </p>
*
* <h2>Output</h2>
* <p>
* [Output description]
* </p>
*
* <h2>Examples</h2>
* PRE-TAG
*    java
*      -jar GenomeAnalysisTK.jar

### 3. Examples

The best way to get started with the GATK is to explore the walkers we've written. Here are the best walkers to look at when getting started:

• CountLoci

It is the simplest locus walker in our codebase. It counts the number of loci walked over in a single run of the GATK.

$STING_HOME/java/src/org/broadinstitute/sting/gatk/walkers/qc/CountLociWalker.java • CountReads It is the simplest read walker in our codebase. It counts the number of reads walked over in a single run of the GATK. $STING_HOME/java/src/org/broadinstitute/sting/gatk/walkers/qc/CountReadsWalker.java

• GATKPaperGenotyper

This is a more sophisticated example, taken from our recent paper in Genome Research (and using our ReadBackedPileup to select and filter reads). It is an extremely basic Bayesian genotyper that demonstrates how to output data to a stream and execute simple base operations.

$STING_HOME/java/src/org/broadinstitute/sting/gatk/examples/papergenotyper/GATKPaperGenotyper.java Please note that the walker above is NOT the UnifiedGenotyper. While conceptually similar to the UnifiedGenotyper, the GATKPaperGenotyper uses a much simpler calling model for increased clarity and readability. ### 4. External walkers and the 'external' directory The GATK can absorb external walkers placed in a directory of your choosing. By default, that directory is called 'external' and is relative to the Sting git root directory (for example, ~/src/Sting/external). However, you can choose to place that directory anywhere on the filesystem and specify its complete path using the ant external.dir property. ant -Dexternal.dir=~/src/external  The GATK will check each directory under the external directory (but not the external directory itself!) for small build scripts. These build scripts must contain at least a compile target that compiles your walker and places the resulting class file into the GATK's class file output directory. The following is a sample compile target: <target name="compile" depends="init"> <javac srcdir="." destdir="${build.dir}" classpath="\${gatk.classpath}" />
</target>


As a convenience, the build.dir ant property will be predefined to be the GATK's class file output directory and the gatk.classpath property will be predefined to be the GATK's core classpath. Once this structure is defined, any invocation of the ant build scripts will build the contents of the external directory as well as the GATK itself.

No posts found with the requested search criteria.

Created 2014-06-10 20:57:36 | Updated | Tags: variantannotator best-practices analyst vcf developer performance walkers java gatk

Hi,

I was wondering if there is a nice way to apply multiple processing steps to each variant (or a group of variants) as they are read so that the variant file is not read again and again. My understanding is that even if I use Queue, each script would read the vcf again. Is that correct?

Created 2014-05-08 14:01:44 | Updated | Tags: readnamefilter walkers

However, --help does not list a tool named ReadNameFilter and I get this error, when I try to use it:

##### ERROR MESSAGE: Invalid command line: Malformed walker argument: Could not find walker with name: ReadNameFilter

Am I going mad and/or is there some simple explanation?

Created 2013-11-26 18:10:04 | Updated | Tags: selectvariants queue qscript walkers java

I am working on a Queue script that uses the selectVariants walker. Two of the arguments that I am trying to use both use an enumerated type: restrictAllelesTo and selectTypeToInclude. I have tried passing these as strings however I get java type mismatch errors. What is the simplest way to pass these parameters to the selectVariant walker in the qscript?

Created 2013-07-10 14:19:13 | Updated | Tags: unifiedgenotyper vcf walkers

I have twice run UnifiedGenotyper and the resultant .vcf file contains only part of chromosome 20. I do not see what I am doing wrong. Neither do the other two people in the lab who have extensive experience with GATKcat

Created 2013-07-09 15:32:13 | Updated | Tags: walkers

I am confused about the Command-line Argument, --downsample_to_coverage. How do I know if the walker is "locus-based" or "non-locus-based"? Your on-line guide page gives an example of each but not how to identify one type of walker from another.

Created 2013-07-02 21:31:04 | Updated | Tags: combinevariants about walkers

-T CombineVariants -genotypeMergeOptions UNIQUIFY Is UNIQUIFY the default? I want every variant in the output file with each individual in the same column

Created 2013-06-26 13:34:36 | Updated | Tags: walkers

I have never heard of an "r-readable table". I used Google to search for it and got nothing helpful. In fact the page on this site is the first hit. It appears on this page http://www.broadinstitute.org/gatk/gatkdocs/org_broadinstitute_sting_gatk_walkers_coverage_DepthOfCoverage.html in the "DepthOfCoverage specific arguments" table, under "Summary" for "--outputFormat".

Created 2013-02-01 10:32:07 | Updated 2013-02-01 10:32:52 | Tags: walkers development

Hi All, In my desparate attempts to learn more about how the GATK works, but since it's written in JAVA, which I have almost no clue about (python all the way), so to be honest I've not the faintest idea how to go about troubleshooting the below error.

I found a blog post by the ever wonderful Pierre Lindebaum here that went through compiling and running you're first GATK walker.

First using Pierre's example (after some compiling issues as there doesn't seem to be a ReadMetaDataTracker class anymore and I replace with RefMetaDataTracker) I get the following error:

java -cp /path/to/GenomeAnalysisTK.jar:/path/to/cofoja-1.0-r139.jar:/path/to/HelloRead.jar org.broadinstitute.sting.gatk.CommandLineGATK -T HelloRead -I path/to/test.bam -R /path/to/human_g1k_v37.fasta
##### ERROR ------------------------------------------------------------------------------------------
##### ERROR stack trace
java.lang.NullPointerException
##### ERROR ------------------------------------------------------------------------------------------
##### ERROR A GATK RUNTIME ERROR has occurred (version 2.2-16-g9f648cb):
##### ERROR
##### ERROR Please visit the wiki to see if this is a known problem
##### ERROR If not, please post the error, with stack trace, to the GATK forum
##### ERROR
##### ERROR MESSAGE: Code exception (see stack trace for error itself)
##### ERROR ------------------------------------------------------------------------------------------


I thought that was a very strange error and in Pierre's example he used GATK version 1.4 where as I am on 2.2.

I also tried the following

java -cp /path/to/cofoja-1.0-r139.jar:/path/to/HelloRead.jar -jar /path/to/GenomeAnalysisTK.jar -T HelloRead -I path/to/test.bam -R /path/to/human_g1k_v37.fasta
##### ERROR ------------------------------------------------------------------------------------------
##### ERROR A USER ERROR has occurred (version 2.2-16-g9f648cb):
##### ERROR The invalid arguments or inputs must be corrected before the GATK can proceed
##### ERROR Please do not post this error to the GATK forum
##### ERROR
##### ERROR See the documentation (rerun with -h) for this tool to view allowable command-line arguments.