Tagged with #ggplot2
1 documentation article | 0 announcements | 0 forum discussions


Comments (43)

Objective

Install all software packages required to follow the GATK Best Practices.

Prerequisites

To follow these instructions, you will need to have a basic understanding of the meaning of the following words and command-line operations. If you are unfamiliar with any of the following, you should consult a more experienced colleague or your systems administrator if you have one. There are also many good online tutorials you can use to learn the necessary notions.

  • Basic Unix environment commands
  • Binary / Executable
  • Compiling a binary
  • Adding a binary to your path
  • Command-line shell, terminal or console
  • Software library

You will also need to have access to an ANSI compliant C++ compiler and the tools needed for normal compilations (make, shell, the standard library, tar, gunzip). These tools are usually pre-installed on Linux/Unix systems. On MacOS X, you may need to install the MacOS Xcode tools. See https://developer.apple.com/xcode/ for relevant information and software downloads. The XCode tools are free but an AppleID may be required to download them.

Starting with version 2.6, the GATK requires Java Runtime Environment version 1.7. All Linux/Unix and MacOS X systems should have a JRE pre-installed, but the version may vary. To test your Java version, run the following command in the shell:

java -version 

This should return a message along the lines of ”java version 1.7.0_25” as well as some details on the Runtime Environment (JRE) and Virtual Machine (VM). If you have a version other than 1.7.x, be aware that you may run into trouble with some of the more advanced features of the Picard and GATK tools. The simplest solution is to install an additional JRE and specify which you want to use at the command-line. To find out how to do so, you should seek help from your systems administrator.

Software packages

  1. BWA
  2. SAMtools
  3. Picard
  4. Genome Analysis Toolkit (GATK)
  5. IGV
  6. RStudio IDE and R libraries ggplot2 and gsalib

Note that the version numbers of packages you download may be different than shown in the instructions below. If so, please adapt the number accordingly in the commands.


1. BWA

Read the overview of the BWA software on the BWA project homepage, then download the latest version of the software package.

  • Installation

Unpack the tar file using:

tar xvzf bwa-0.7.12.tar.bz2 

This will produce a directory called bwa-0.7.12 containing the files necessary to compile the BWA binary. Move to this directory and compile using:

cd bwa-0.7.12
make

The compiled binary is called bwa. You should find it within the same folder (bwa-0.7.12 in this example). You may also find other compiled binaries; at time of writing, a second binary called bwamem-lite is also included. You can disregard this file for now. Finally, just add the BWA binary to your path to make it available on the command line. This completes the installation process.

  • Testing

Open a shell and run:

bwa 

This should print out some version and author information as well as a list of commands. As the Usage line states, to use BWA you will always build your command lines like this:

bwa <command> [options] 

This means you first make the call to the binary (bwa), then you specify which command (method) you wish to use (e.g. index) then any options (i.e. arguments such as input files or parameters) used by the program to perform that command.


2. SAMtools

Read the overview of the SAMtools software on the SAMtools project homepage, then download the latest version of the software package.

  • Installation

Unpack the tar file using:

tar xvzf samtools-0.1.2.tar.bz2 

This will produce a directory called samtools-0.1.2 containing the files necessary to compile the SAMtools binary. Move to this directory and compile using:

cd samtools-0.1.2 
make 

The compiled binary is called samtools. You should find it within the same folder (samtools-0.1.2 in this example). Finally, add the SAMtools binary to your path to make it available on the command line. This completes the installation process.

  • Testing

Open a shell and run:

samtools 

This should print out some version information as well as a list of commands. As the Usage line states, to use SAMtools you will always build your command lines like this:

samtools <command> [options] 

This means you first make the call to the binary (samtools), then you specify which command (method) you wish to use (e.g. index) then any options (i.e. arguments such as input files or parameters) used by the program to perform that command. This is a similar convention as used by BWA.


3. Picard

Read the overview of the Picard software on the Picard project homepage, then download the latest version of the software package.

  • Installation

Unpack the zip file using:

tar xjf picard-tools-1.130.zip 

This will produce a directory called picard-tools-1.130 containing the Picard jar files. Picard tools are distributed as a pre-compiled Java executable (jar file) so there is no need to compile them.

Note that it is not possible to add jar files to your path to make the tools available on the command line; you have to specify the full path to the jar file in your java command, which would look like this:

java -jar ~/my_tools/jars/picard.jar <Toolname> [options]

This syntax will be explained in a little more detail further below.

However, you can set up a shortcut called an "environment variable" in your shell profile configuration to make this easier. The idea is that you create a variable that tells your system where to find a given jar, like this:

PICARD = "~/my_tools/jars/picard.jar"

So then when you want to run a Picard tool, you just need to call the jar by its shortcut, like this:

java -jar $PICARD <Toolname> [options]

The exact way to set this up depends on what shell you're using and how your environment is configured. We like this overview and tutorial which explains how it all works; but if you are new to the command line environment and you find this too much too deal with, we recommend asking for help from your institution's IT support group.

This completes the installation process.

  • Testing

Open a shell and run:

java -jar picard.jar -h 

This should print out some version and usage information about the AddOrReplaceReadGroups.jar tool. At this point you will have noticed an important difference between BWA and Picard tools. To use BWA, we called on the BWA program and specified which of its internal tools we wanted to apply. To use Picard, we called on Java itself as the main program, then specified which jar file to use, knowing that one jar file = one tool. This applies to all Picard tools; to use them you will always build your command lines like this:

java -jar picard.jar <ToolName> [options] 

This means you first make the call to Java itself as the main program, then specify the picard.jar file, then specify which tool you want, and finally you pass whatever other arguments (input files, parameters etc.) are needed for the analysis.

Note that the command-line syntax of Picard tools has recently changed from java -jar <ToolName>.jar to java -jar picard.jar <ToolName>. We are using the newer syntax in this document, but some of our other documents may not have been updated yet. If you encounter any documents using the old syntax, let us know and we'll update them accordingly. If you are already using an older version of Picard, either adapt the commands or better, upgrade your version!

Next we will see that GATK tools are called in essentially the same way, although the way the options are specified is a little different. The reasons for how tools in a given software package are organized and invoked are largely due to the preferences of the software developers. They generally do not reflect strict technical requirements, although they can have an effect on speed and efficiency.


4. Genome Analysis Toolkit (GATK)

Hopefully if you're reading this, you're already acquainted with the purpose of the GATK, so go ahead and download the latest version of the software package.

In order to access the downloads, you need to register for a free account on the GATK support forum. You will also need to read and accept the license agreement before downloading the GATK software package. Note that if you intend to use the GATK for commercial purposes, you will need to purchase a license. See the licensing page for an overview of the commercial licensing conditions.

  • Installation

Unpack the tar file using:

tar xjf GenomeAnalysisTK-3.3-0.tar.bz2 

This will produce a directory called GenomeAnalysisTK-3.3-0 containing the GATK jar file, which is called GenomeAnalysisTK.jar, as well as a directory of example files called resources. GATK tools are distributed as a single pre-compiled Java executable so there is no need to compile them. Just like we discussed for Picard, it's not possible to add the GATK to your path, but you can set up a shortcut to the jar file using environment variables as described above.

This completes the installation process.

  • Testing

Open a shell and run:

java -jar GenomeAnalysisTK.jar -h 

This should print out some version and usage information, as well as a list of the tools included in the GATK. As the Usage line states, to use GATK you will always build your command lines like this:

java -jar GenomeAnalysisTK.jar -T <ToolName> [arguments] 

This means that just like for Picard, you first make the call to Java itself as the main program, then specify the GenomeAnalysisTK.jar file, then specify which tool you want, and finally you pass whatever other arguments (input files, parameters etc.) are needed for the analysis.


5. IGV

The Integrated Genomics Viewer is a genome browser that allows you to view BAM, VCF and other genomic file information in context. It has a graphical user interface that is very easy to use, and can be downloaded for free (though registration is required) from this website. We encourage you to read through IGV's very helpful user guide, which includes many detailed tutorials that will help you use the program most effectively.


6. RStudio IDE and R libraries ggplot2 and gsalib

Download the latest version of RStudio IDE. The webpage should automatically detect what platform you are running on and recommend the version most suitable for your system.

  • Installation

Follow the installation instructions provided. Binaries are provided for all major platforms; typically they just need to be placed in your Applications (or Programs) directory. Open RStudio and type the following command in the console window:

install.packages("ggplot2") 

This will download and install the ggplot2 library as well as any other library packages that ggplot2 depends on for its operation. Note that some users have reported having to install one additional package themselves, called reshape, which you can do as follows:

install.packages("reshape")

Finally, do the same thing to install the gsalib library:

install.packages("gsalib")

This will download and install the gsalib library.

Important note

If you are using a recent version of ggplot2 and a version of GATK older than 3.2, you may encounter an error when trying to generate the BQSR or VQSR recalibration plots. This is because until recently our scripts were still using an older version of certain ggplot2 functions. This has been fixed in GATK 3.2, so you should either upgrade your version of GATK (recommended) or downgrade your version of ggplot2. If you experience further issues generating the BQSR recalibration plots, please see this tutorial.

No posts found with the requested search criteria.
No posts found with the requested search criteria.