# Tagged with #dependencies 3 documentation articles | 0 announcements | 1 forum discussion

Created 2014-06-12 22:52:09 | Updated 2015-04-26 00:23:41 | Tags: bqsr dependencies rscript analyzecovariates

When you run AnalyzeCovariates to analyze your BQSR outputs, you may encounter an error starting with this line:

The main reason why this error often occurs is simple, and so is the solution. The script depends on some external R libraries, so if you don't have them installed, the script fails. To find out what libraries are necessary and how to install them, you can refer to this tutorial.

One other common issue is that the version of ggplot2 you have installed is very recent and is not compatible with the BQSR script. If so, download this Rscript file and use it to generate the plots manually according to the instructions below.

If you have already checked that you have all the necessary libraries installed, you'll need to run the script manually in order to find out what is wrong. To new users, this can seem complicated, but it only takes these 3 simple steps to do it!

### 1. Re-run AnalyzeCovariates with these additional parameters:

• -l DEBUG (that's a lowercase L, not an uppercase i, to be clear) and
• -csv my-report.csv (where you can call the .csv file anything; this is so the intermediate csv file will be saved).

### 2. Identify the lines in the log output that says what parameters the RScript is given.

The snippet below shows you the components of the R script command line that AnalyzeCovariates uses.

INFO  18:04:55,355 AnalyzeCovariates - Generating plots file 'RTest.pdf'
DEBUG 18:04:55,672 RecalUtils - R command line: Rscript (resource)org/broadinstitute/gatk/utils/recalibration/BQSR.R /Users/schandra/BQSR_Testing/RTest.csv /Users/schandra/BQSR_Testing/RTest.recal /Users/schandra/BQSR_Testing/RTest.pdf
DEBUG 18:04:55,687 RScriptExecutor - Executing:
DEBUG 18:04:55,688 RScriptExecutor -   Rscript
DEBUG 18:04:55,688 RScriptExecutor -   -e
DEBUG 18:04:55,688 RScriptExecutor -   tempLibDir = '/var/folders/j9/5qgr3mvj0590pd2yb9hwc15454pxz0/T/Rlib.2085451458391709180';source('/var/folders/j9/5qgr3mvj0590pd2yb9hwc15454pxz0/T/BQSR.761775214345441497.R');
DEBUG 18:04:55,689 RScriptExecutor -   /Users/schandra/BQSR_Testing/RTest.csv
DEBUG 18:04:55,689 RScriptExecutor -   /Users/schandra/BQSR_Testing/RTest.recal
DEBUG 18:04:55,689 RScriptExecutor -   /Users/schandra/BQSR_Testing/RTest.pdf

So, your full command line will be:

RScript BQSR.R RTest.csv RTest.recal RTest.pdf

• BQSR.R is the name of the script you want to run. It can be found here
• RTest.csv is the name of the original csv file output from AnalyzeCovariates.
• RTest.recal is your original recalibration file.
• RTest.pdf is the output pdf file; you can name it whatever you want.

### 3. Run the script manually with the above arguments.

For new users, the easiest way to do this is to do it from within an IDE program like RStudio. Or, you can start up R at the command line and run it that way, whatever you are comfortable with.

Created 2012-11-21 16:24:06 | Updated 2015-04-26 00:07:35 | Tags: intro dependencies requirements

### 1. Operating system

The GATK runs natively on most if not all flavors of UNIX, which includes MacOSX, Linux and BSD. It is possible to get it running on Windows using Cygwin, but we don't provide any support nor instructions for that.

### 2. Java 7 / 1.7

The GATK is a Java-based program, so you'll need to have Java installed on your machine. The Java version should be at 1.7 (at this time we don't officially support 1.8, and 1.6 no longer works). You can check what version you have by typing java -version at the command line. This article has some more details about what to do if you don't have the right version. Note that at this time we only support the Sun/Oracle Java JDK; OpenJDK is not supported.

### 4. R dependencies

Some of the GATK tools produce plots using R, so if you want to get the plots you'll need to have R and Rscript installed, as well as several R libraries. Full details can be found in the Tutorial on installing required software.

### 3. Familiarity with command-line programs

The GATK does not have a Graphical User Interface (GUI). You don't open it by clicking on the .jar file; you have to use the Console (or Terminal) to input commands. If this is all new to you, we recommend you first learn about that and follow some online tutorials before trying to use the GATK. It's not difficult but you'll need to learn some jargon and get used to living without a mouse. Trust us, it's a liberating experience :)

Created 2012-08-15 18:49:01 | Updated 2013-03-25 18:23:56 | Tags: official developer dependencies advanced

The GATK build system uses the Ivy dependency manager to make it easy for our users to add additional dependencies. Ivy can pull the latest jars and their dependencies from the Maven repository, making adding or updating a dependency as simple as adding a new line to the ivy.xml file.

If your tool is available in the maven repository, add a line to the ivy.xml file similar to the following:

<dependency org="junit" name="junit" rev="4.4" />

If you would like to add a dependency to a tool not available in the maven repository, please email gsahelp@broadinstitute.org

## Updating SAM-JDK and Picard

Because we work so closely with the SAM-JDK/Picard team and are critically dependent on the code they produce, we have a special procedure for updating the SAM/Picard jars. Please use the following procedure to when updating sam-*.jar or picard-*.jar.

• Get the latest svn versions for picard public and picard private by running the following commands:

svn info $PICARD_PUBLIC_HOME | grep "Revision" svn info$PICARD_PRIVATE_HOME | grep "Revision"

• Rename the jars and xmls in $STING_HOME/settings/repository/net.sf to {picard|sam}-$PICARD_PUBLIC_MAJOR_VERSION.$PICARD_PUBLIC_MINOR_VERSION.PICARD_PUBLIC_SVN_REV.{jar|xml} • Update the jars in$STING_HOME/settings/repository/net.sf with their newer equivalents in $PICARD_PUBLIC_HOME/dist/picard_lib. • Update the xmls in$STING_HOME/settings/repository/net.sf with the appropriate version number ($PICARD_PUBLIC_MAJOR_VERSION.$PICARD_PUBLIC_MINOR_VERSION.$PICARD_PUBLIC_SVN_REV). ### Updating the Picard private jar • Create the picard private jar with the following command: ant clean package -Dexecutable=PicardPrivate -Dpicard.dist.dir=${PICARD_PRIVATE_HOME}/dist

• Rename picard-private-parts-*.jar in $STING_HOME/settings/repository/edu.mit.broad to picard-private-parts-$PICARD_PRIVATE_SVN_REV.jar.

• Update picard-private-parts-*.jar in $STING_HOME/settings/repository/edu.mit.broad with the picard-private-parts.jar in$STING_HOME/dist/packages/picard-private-parts.

• Update the xml in \$STING_HOME/settings/repository/edu.mit.broad to reflect the new revision and publication date.

No posts found with the requested search criteria.

Created 2013-12-20 15:12:59 | Updated 2013-12-20 15:53:02 | Tags: dependencies error build

Hi, this took me a while to debug, so I'm posting the solution here. I started by downloading a clean copy of GATK core platform from GitHub. When I first tried building by running ant, I got the compiler errors below. The reason turned out to be that an unrelated jar (gsea2-2.0.12.jar) was on my CLASSPATH (this is from another Broad tool I've been using - Gene Set Enrichment Analysis). gsea2-2.0.12.jar apparently contains outdated versions of apache math and io packages which conflict with the GATK versions. Taking this jar off my CLASSPATH fixed the issue.

-Ben

Ps. the compiler errors were:

gatk.compile.internal.source:
[javac] Compiling 681 source files to /prog/GATK/gatk_platform_git/build/java/classes
[javac]                                              ^
[javac]   required: String
[javac]   found:    Object
[javac] /prog/GATK/gatk_platform_git/public/java/src/org/broadinstitute/sting/utils/MannWhitneyU.java:50: error: no suitable constructor found for NormalDistributionImpl(double,double,double)
[javac]     private static NormalDistribution APACHE_NORMAL = new NormalDistributionImpl(0.0,1.0,1e-2);
[javac]                                                       ^
[javac]     constructor NormalDistributionImpl.NormalDistributionImpl() is not applicable
[javac]       (actual and formal argument lists differ in length)
[javac]     constructor NormalDistributionImpl.NormalDistributionImpl(double,double) is not applicable
[javac]       (actual and formal argument lists differ in length)
[javac] Note: Some input files use or override a deprecated API.
[javac] Note: Recompile with -Xlint:deprecation for details.
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[javac] 2 errors

BUILD FAILED
/prog/GATK/gatk_platform_git/build.xml:454: Compile failed; see the compiler error output for details.